Showing posts from 2015

How To Hard UnBricked LG G3 (All Variants)

After Read This Tutorial You Will Able To Fix These Situations.NO BOOT , NO RECOVERY , NO DOWNLOAD MODE

1 : Shows     "LGE AndroidNet USB port"               "LGE AndroidNet USB Modem"

2 : Only Shows "Qualcomm 9008"
Now Start FixingIf You Are On Situation "1" You To Need To Change "LGE AndroidNet USB port" To "Qualcomm 9008"
1- open the phone
2- On MotherBoard Remove The Cover Of "eMMC"

3- short cut the pins in the photo you provided "without the battery" After Connect The "USB Data Cable"

After This Your Phone Show"Qualcomm 9008"
Reassemble Your Phone
And Connect With PC With Out Battary

Now Fixing "

How To Unbrick Samsung Note 2 N7100 (Back To Stock)

Preparations :Install Samsung USB Driver From HereDownload Latest Kitkat Firmware of region from Here Sign Up Required For DownloadDownload Odin From Here
Installation :1 : Extract Firmware .zip 2 : Run Odin3_v3.10.7.exe

3 : Now Put Your Phone into Downloading Mode    *Turn Off Your Phone    *Press Volume Down + Home Button + Power Button    *Press Volume Up Key To Continue

How to Upgrade LG Optimus G Pro (F240L/S/K) To Lollipop (5.0.1) Official

Great news for F240KLS users.... Official Android Lollipop 5.0.1 is released 

First Of ALL Download kdz Files




2) Make sure you have LG United Drivers already installed Download from here

3) Download LG flash Tool from here

4) Extract zip And copy kdz File in LG flash tool 2014 folder

5) Run LGFlashTool2014.exe

  If no run then download and install the Visual C library ++ Runtime:

6) Put your Phone Download Mode And connect with computer 

attaching the usb cable to the phone, holding both the up and down volume buttons at the same time and lastly inserting the usb cable into the computer; wait for the drivers to finish loading if doing it for the first time.

7) 1.Select type = 3GQCT
   2.Phone mode = Emergency
   3.Select kdz file

How to Fix Service Disabled Problem in LG Mobiles

First Of All :Install Stock rom on your phone
Run phone App
Enter this code
5457#* enter your model number #
i.e, 5457#*240# for LG G Pro F240
A menu popup 
click on Wcdma channel
and select on full option 
then press back button
then click on band selection 
select Gsm bands only

your Signal will come Back :)

Android lollipop (5.0.2) For Sky vega iron a870

1. Information about the project: - The device is developed: Pantech Vega IM-A870 Iron  - Development Platform: Lollipop AOSP 5.0.2 -  Fundamentals: Pantech original kernel - Android 4.4.2 kitkat  - Group development: Tekcafe Team -  Progress of the project: 90% The ROM was developed and tested is not supported as much as 12 CyanogenMod ROM version of Tekcafe Team. But still to be updated.

2. Installation instructions:
Download Rom from here.
Download Recovery from here.
Use Mini and Micro Gapps from Xda.
 Only sky a870    Note, after flash ROM, reboot and the system did not catch that wave, then reboot again. If the reboot is complete, the flash is not airing soon this patch here


How to install Kitkat (4.4.2) and ubrick Motorola droid razr m xt907 (step by step)

Requirements :Download firmware file  from
RSD lite tool from

Download RSD drivers from Motorola site

Installing :
1 : install RSD tool And drivers on your Computer 2 : Run RSD lite program 3 : Extract firmware file 4 : on RSD tool Select this xml file  VZW_XT907_4.4.2-KDA20.62-15.1_1FF.xml  from firmware extracted folder 5 : put your phone in fastboot mode by power off your phone and press and hold these keys (power+volume up and down) then a new screen appears navigate ap fastboot select it with volume up key And connect with computer  Note: make sure drivers installed on your  6: on Rsd tool your device appears  7 : click on start and wait until RSD lite tool pass your phone 8 : if your phone again goes in fastboot mode then press power for 3 sec after off press power+volume up+down and select normal power with volume up key 9 :After…