Showing posts from 2014

How To Unbrick LG Optimus G – fix bootloop/security issues

First of all reinstall kdz on your phone :

From here

Download the manual adb wipe batch file
1) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.

2) Force the phone off by holding the power button for appx 15secs.

3) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LGlogo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.

4) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wi…

How to Root/Recovery Lg su640 Jellybean (4.1.2 30d/c)

Update TNT new Root

*download file and extract it
*Enable USB debugging 
*connect with pc select lg software mode
*open TNT_LG_JB_Root.exe
*press any key
 remove usb
 disable usb debugging
 Re-enable usb debugging
 connect usb
 press any key

I wish you success!

2. CWM:
Download the following file to decompress connect usb debuging mode + LG software
Click on Flash.bat
Accept su acess from phone !

How to install kitkat 4.4 on Qmobile a900

Installation Instructions:Download The file from the given link above.To flash this file your A900 must be rooted and have custom recovery If your phone is not rooted kindly refer to this post for rooting procedure installing custom recovery in your phone kindly follow these steps:download and install MTKtools from playstoreDownload CWMR from here: MTKtoolsSelect recovery update optionBrowse to your downloaded CWMR and apply itNow place the downloaded file ( in the root of your SD cardTurn off your phoneGo to the recovery mode  by pressing and holding Volume Up + Power button at the same timeFirst make a backup of your current ROM so if you mess up somewhere you can go back to your old ROMSelect back and restoreand then select backup. Wait until its doneNow go back and select Wipe/data or Factory ResetSelect wipe cache partitionNow go to advanced and Wip…

How to upgrade Qmobile noir i9 to Kitkat (4.4.2) official

Disclaimer: Flash at your own risk, I added tutorial so if something gone wrong to your phone, don't blame me.

Quote: IMEI / NVRAM Backup
Method 1:

Before Installing the KitKat Follow These Steps.

1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.

Quote: QMobile KitKat Release
Before you update Back Up your current rom using custom recovery in case you want to revert back

Smart Phone Flash Tool and Driver

Firmware Download

1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Download Scatter File From Attachments And …

Typing Master Pro 7.10 licence key (serial key)

1 : Disable Network (disconnect your internet)
2 : Enter this 

Name: RathouR

Thanks :)

Android Tablet Firmware Flashing Ainol Numy Ax1

Preparation tools before upgrading: PC computer, Computer Burn Tool, Upgrade Firmware, one 5pin Data cable; 

1 : Unzip upgrade firmware package download from

2 : Click and open SP_Flash_Tool icon after unzipping Sp flash tool download from attached links 

3 : Click  on scatter-loading and   browse and choose from unzipped firmware package, click and open the third file whose suffix is txt 

5 :Click  first,than power off the tablet, connect the tablet and PC by cable;

6:If this is the first time you upgrade, the system will prompt you to install USB port driver and pop up a dialog box, manual browse the place where your downloaded USB VCOM Driver locates, choose and install the driver according your computer system  the first one is for Win2000 and XP, the second one is for Vista, the third one is for Win7;

7:When the driver is installed successfully, the upgrade tool click on download ; 


How To Upgrade Samsung Galaxy Beam i8530 To Jellybean 4.1.2

Official 4.1.2 for galaxy beam

1:Download firmware from here
2:then extract it you get these file

3:then extract odin file

4:open odin3 v3.07.exe

5:then put files
pit file in pit section
code file in pda section
csc file in csc section

 install samsung usb drivers
put your device in download mobe turn off your device then press these button (volume down+home button+power) then connect your device with computer
your device shows in id:com colum
then click on start
after 10 mins done

keep visiting